• Modular system for building fixtures from standard square elements
• Torsion-proof design of the connections for a highly stabile fixture
• Large selection of structural elements, cantilevers, supports and clamping elements
• Compatible with all other dk fixture programs for an infinite number of variants
• 4-sided direct adaptation of target bases with M6 threads, which are available in a 25 mm grid

Reversible frame design from the QUADERFIX program

The modular system also allows the configuration of rectangular or polygonal frames without any problems.
Test specimens fixed via clamping elements can be rotated with the fixture and the target bases by 180° and securely placed back on a 3-point support.
Base plate can be mounted either on the machine or on one of the dk fixing programs.

The post Fixture system QUADERFIX with target bases appeared first on messpunkte.de.

The patches do not lose their adhesive effect, even after repeated use. If after some use the adhesive surface adheres poorly or no longer adheres at all, it can be cleaned with a damp cloth.

For easy protection of the patches after initial use, we recommend our folder. The folder allows you to store the patches quickly and easily so that you can reuse them as often as possible.

The post Glueless patches for reference targets, 40 pieces appeared first on messpunkte.de.

IMPORTANT: Only our single-lane target rolls (item number: 12.60.100.ta) can be used with the applicator. Please make sure to only order rolls with the addition “for target applicator”. We currently only offer rolls with 6 mm retroreflective targets for the target applicator.

Scope of delivery:

• applicator gun
• practical soft case for safe storage of the applicator
• users guide in German or English (depending on the country of delivery)

The post Target applicator appeared first on messpunkte.de.

• Rail for precise alignment in the rotation axis
• SWA39 quick-change interface for efficient change between different clamping devices and pre-equipped fixtures
• Secure fixing of the test specimen with minimal concealment by holding elements
• Simple and repeatable part fixing for series measurement
• very versatile SWA39 modular system with many different clamping devices, sizes and accessories

+ PLUS +

Universal OCTOFIX reference target base system on a 3D arm suitable for SWA39

• Frame with mounting options for up to 16 target bases size M with 19 surfaces each
• Extensions for placing the measuring point bases at a distance of 50 mm from the frame and thus up to 100 mm apart
• High-strength 3D arm with central clamping and toothed washer for maximum stability and strength of the target bases
• Perfect placement of the targets for maximum process efficiency

The post OCTOFIX starter set SWA39 with bench vise appeared first on messpunkte.de.

The folder has 8 pages, giving you enough space for all 40 stripes in a package of glueless patches.

Only apply the strips to the front of the plastic pages to protect the surface of the strips and the targets on them.

To ensure that your glueless patches last as long as possible, we recommend cleaning the adhesive side with a damp cloth before placing the strips into the folder.

The folder can also be used to store our glueless targets.

NOTE: The folder is delivered without glueless patches. These must be ordered separately if required.

The post Folder for glueless patches appeared first on messpunkte.de.

• 1x 3 mm targets retroreflective high reflective, on sheets, light adhesive, 2000 pcs.
• 1x 3 mm targets retroreflective high reflective, on sheets, strong adhesive, 2000 pcs.
• 1x 6 mm targets retroreflective high reflective, on sheets, light adhesive, 2000 pcs.
• 1x 6 mm targets retroreflective high reflective, on sheets, strong adhesive, 2000 pcs.
• 1x 6 mm targets retroreflective high reflective, on sheets, glueless adhesive film, 210 pcs.
• 1x plastic scraper for easy target removal
• magnetic target bases, size M, set of 10, for 3 mm targets and smaller
• magnetic target bases, size L, set of 10, for 8 mm targets and smaller
• 500 ml can of ATTBLIME AB6 scanning spray
• additional cut-out for accessories of your choosing, for example reference pillars

Please note: if you require other targets than those included in the case, please let us know your desired configuration by e-mail: info@messpunkte.de

The post Scanning essentials case appeared first on messpunkte.de.

Our bases have many smart features:

• bright orange color: makes it easy to find the bases quickly after scanning; never forget one of your bases again!
• soft magnet housing: the magnet does not come into direct contact with the surface of your component, thus preventing damage!
• Different sizes: use the size that suits you best. As small as possible (as little component coverage as possible) but as large as necessary (so that your targets have enough space)!
• Lightweight 3D printing: thanks to 3D printing, the bases are not made of solid material and are therefore very light. Important for handling and transport!

Select the size of the bases according to the targets you use:

• Size M for measuring points up to a maximum diameter of 3 mm
• Size L for measuring points up to a maximum diameter of 12 mm
• Size XL for measuring points up to a maximum diameter of 25 mm

Please take note that the bases are delivered without targets, they must be ordered additionally.

IMPORTANT: When attaching the targets, make sure that you position them randomly. Each base must be unique. Under no circumstances should the targets be positioned in a common pattern (e.g. always in the center of the surfaces).

The post Target bases magnetic, size M, set of 10 appeared first on messpunkte.de.

Our bases have many smart features:

• bright orange color: makes it easy to find the bases quickly after scanning; never forget one of your bases again!
• soft magnet housing: the magnet does not come into direct contact with the surface of your component, thus preventing damage!
• Different sizes: use the size that suits you best. As small as possible (as little component coverage as possible) but as large as necessary (so that your targets have enough space)!
• Lightweight 3D printing: thanks to 3D printing, the bases are not made of solid material and are therefore very light. Important for handling and transport!

Select the size of the bases according to the targets you use:

• Size M for measuring points up to a maximum diameter of 3 mm
• Size L for measuring points up to a maximum diameter of 12 mm
• Size XL for measuring points up to a maximum diameter of 25 mm

Please take note that the bases are delivered without targets, they must be ordered additionally.

IMPORTANT: When attaching the targets, make sure that you position them randomly. Each base must be unique. Under no circumstances should the targets be positioned in a common pattern (e.g. always in the center of the surfaces).

The post Target bases magnetic, size L, set of 10 appeared first on messpunkte.de.

Our bases have many smart features:

• bright orange color: makes it easy to find the bases quickly after scanning; never forget one of your bases again!
• soft magnet housing: the magnet does not come into direct contact with the surface of your component, thus preventing damage!
• Different sizes: use the size that suits you best. As small as possible (as little component coverage as possible) but as large as necessary (so that your targets have enough space)!
• Lightweight 3D printing: thanks to 3D printing, the bases are not made of solid material and are therefore very light. Important for handling and transport!

Select the size of the bases according to the targets you use:

• Size M for measuring points up to a maximum diameter of 3 mm
• Size L for measuring points up to a maximum diameter of 12 mm
• Size XL for measuring points up to a maximum diameter of 25 mm

Please take note that the bases are delivered without targets, they must be ordered additionally.

IMPORTANT: When attaching the targets, make sure that you position them randomly. Each base must be unique. Under no circumstances should the targets be positioned in a common pattern (e.g. always in the center of the surfaces).

The post Target bases magnetic, size XL, set of 8 appeared first on messpunkte.de.

Depending on the desired mounting method, magnetic bases or bases with a threaded rod can be ordered.

The target size determines the size of the needed base:

• Size S for targets up to 1.5 mm diameter
• Size M for targets up to 3 mm diameter
• Size L for targets up to 8 mm diameter
• Size XL for targets up to 12 mm diameter

Ideally the bases are attached to a dk fixing system. If you need a fixing system in addition to the bases, simply contact us using our contact form and we will support you with advice.

Please note that the bases are supplied without reference targets. They must be ordered additionally.

The post Target bases with thread, size S, set of 10 appeared first on messpunkte.de.